Humidity sensor with led alarm | Arduino project

This page contains Arduino Humidity sensor with led alarm source code. This project is good for someone who wants to make a humidity meter or hygrometer with led alarm if humidity and temperature over a threshold. It's easy to make and doesn't require an external power supply, just use power from an Arduino UNO R3 board (USB power compatible with this project).

Electronic components list:
1 x Arduino Uno R3
1x 20 x4 I2C LCD display
1 x AM 2320 humidity/temp sensor
1 x 5 mm led ( 2 x if you plan to use led for pin 13 instead built-in led)
1 x 1000 ohms resistor ( 2 x if you plan to use led for pin 13 instead built-in led)
Any USB power adapter, 500 mA current at least.

Here is the Arduino code:
AM 2320 library
LCD display i2c library

#include <Wire.h>
#include <AM2320.h>
#include <LiquidCrystal_I2C.h>
LiquidCrystal_I2C lcd(0x3F, 20, 4);
AM2320 th;
int led2 = 12;

How to change broken illuminate switch.

Outlet power strip is endurance but the illuminated switch seems fragile. The illuminated neon switch can't withstand high current load well and sometimes broken, but you don't have to buy new power strip because you can change just switch for very low cost.

The video below will show you how to change on/off neon light rocker switch(illuminated switch) right way without making firework.

Enjoy DIY world!!!